Area Walls & Grates (Standard Width)
Area Walls 20 Gauge Round (Regular Grade)
Area Walls 18 Gauge Round (Commercial Grade)
Area Walls 18 Gauge Square (Commercial Grade)
Area Walls 18 Gauge Non-Egress Casement Style (Commercial Grade)
Area Walls 18 Gauge Egress Casement Style
Area Wall Grate & Ladders (Egress)
Area Walls & Grates (Standard Grade)
AW | Area Walls
Standard Width | 22 Gauge
Round Type | Width 37” | Proj. 16” | Rounded Corners
Straight Type | Width 37” | Proj. 12” | Rounded Corners
Foundation Vent | Round Type | Width 19-1/2” | Proj. 10”
| Standard Width 37” | Round or Straight Type | Galv. Steel | ||
| Model | Nominal Height | Weight Each (#) |
| AW12 | 12” | 7 |
| AW15 | 15” | 8 |
| AW18 | 18” | 10 |
| AW24 | 24” | 13 |
| AW30 | 30” | 16 |
| AW36 | 36” | 20 |
| AW48 | 48” | 25 |
| Shipped: Wired Bundles of 5 | ||
| Foundation Vent Area Wall | Round Type | Galv. Steel | ||
| Width 19-1/2” | Projection 10” | ||
| Model | Nominal Height | Weight Each (#) |
| AWFV | 12” | 5 |
| Shipped: Strapped Bundles of 10 | ||
• 12”, 18”, 24”, and foundation vent area walls also have rounded
bottom corners for extra safety
• Stamped from single steel sheet
• Bright finish reflects light into basement
• Holes in flanges for bolting to wall
• Deep corrugation stiffens against back fill
• Minimum G-60 galvanized coating
• All back filling should be done gradually to prevent excessive
pressure against area wall
AWG | Area Wall Grates
Standard Width
| STEEL GRATES | ROUND OR STRAIGHT TYPE | ||
| Model | Width | Weight Each (#) |
| AWGR | 37” | 10 |
| AWGS | 37” | 10 |
| AWGF | 19-1/2″ | 3.5 |
• Hot-dipped galvanized finish
• Grating type admits maximum light and air into basement