Column Components and Tubing

Column Components and Tubing
PRINT FRIENDLY PDF
Permanent Screw Assembly (CP Plate Attached To Screw)
Model  Size Adjustment Maximum Load*
PA3 3” O.D. Tube 4” 18,700#
PA35 3-1/2” O.D. Tube 4” 23,800
PA4 4” O.D. Tube 4” 28,900
PA35216 3-1/2” O.D. x .216 Wall 4” 41,500
PA35P 3 1/2″ Sch 40 Pipe, 4″ O.D. 4″ 60,078
PA4P  4″ Sch 40 Pipe, 4 1/2″ O.D.  4″  60,078
Turning Bar Included with Each Assembly

*All Screw Assemblies must be encased in minimum 3,500 psi concrete; installed head first, with collar nut buried.

Column Plates
Model  Dimensions
BP 4” x 8” x 1/4” – 2” Center Hole
BPS 4” x 8” x 1/4” – 2” Center Hole w/ Straps
BPSS 4” x 5-3/4” x 1/4” – 2” Center Hole
CP 3-1/2” x 6” x 1/4” – 5/8” Center Hole
PS 1/8” x 8” x 5/8” Straps (2) Welded to Above B Plate.
TB 3/8” x 7” Turning Bar
Shipped: Loose

• BP: Top plate for adjustable columns; top and bottom for fixed columns
• BPS: BP with straps
• BPSS: Shorter length fits corners of partition walls
• CP: Used with permanent assembly
• Plates have full bearing on all common beam flanges
•Holes provided for bolt or lag-screw attachment to beam

11 Gauge Tubing | A500 Grade B (Items Not Shown)
Model  Size Length
T324 3” O.D. 24’
T3524 3-1/2” O.D. 24’
T424 4” O.D. 24’

 

.216 Wall Tubing | A500 Grade B (Item Not Shown)
Model  Size Length
T3524216 3-1/2” O.D. 24’

IMPORTANT
Not responsible for the installation, alteration, or modification of any completed product, or the usage of any component in the fabrication of any product beyond our control.